Logo
We are a TITAN STOCKING DISTRIBUTOR

Titan Check Valves


Check valves prevent the system from draining if the pump stops and protect against backflow, which could harm the pump or other equipment.Titan Flow Control, Inc. offers a variety of check valve designs to meet your specific needs including center-guided globe style valves, center-guided wafer style valves, center guided threaded valves, dual disc check valves, single disc check valves, and full body swing check valves.

Center-Guided
Check Valves

Globe Style

Titan Check Valve Globe Style

Center Guided Silent Globe Type

MODELS:
CV 50 - DI
Globe Class 150 Ductile Iron Sizes 2" - 24"
CV 51 - CS/SS Globe Class 150 Carbon or Stainless Sizes 2" - 24"
CV 52 - DI Globe Class 300 Ductile Iron Sizes 2" - 24"
CV 52 - CS/SS Globe Class 300 Stainless Steel Sizes 2" - 14"

Size Range: 2" - 24"
Larger Sizes Available

Titan Engineers developed the patented CV 50 series of center guided, globe style, check valves. Only Titan's CV 50 series have integral straightening vanes to calm turbulent flows, smaller stem guides for less flow obstruction, and extra clearance to allow direct butterfly valve installation on the outlet side.

Wafer Style

Titan Wafer Check Valve Center Guided

Wafer Type Silent Check Valve

MODELS:
CV 90 - DI
Wafer Class 150 / 300 Ductile Iron Sizes 2" - 12"
CV 91 - SS Wafer Class 150 / 300 Stainless Steel Sizes 2" - 12"

Size Range: 2" - 12"
Sizes 2" - 6" Provide Dual Pressure Service ASME Class 150/300

Designed for Long Service Life
Newly designed CV90's have straightening vanes that reduce turbulence in incoming flow, thus minimizing noise, vibrations, erosion, cavitations, and other factors that could result in premature valve failure.

Threaded End Silent

Titan Threaded Check Valve Center Guided

Threaded End Silent Check Valve

MODELS:
CV 20 - BR
Threaded
WOG 400 PSI @ 100°F
Brass Sizes 1/4" - 2"
CV 80 - SS Threaded Class 300
WOG 720 PSI @ 100°F
Stainless Steel Sizes 3/8" - 3"

Size Range: 1/4" - 3"

Quick Closure to Reduce Water Hammer
Silent shut-off is achieved via the fully automatic, spring assisted disc that closes near zero flow velocity. The lightweight, center guided disc design creates a positive shutoff prior to flow reversal and helps to keep slamming and surges to a minimum.

Double Disc Check Valves

Wafer Type

Wafer Style Dual Disc Check Valve Model CV41A-DI

Complies with API 594 Dimensions
The CV41A-DI meets API 594 ASME Class 125 face-to-face dimensions, This allows the CV41A-DI to be a natural replacement for outdated cast iron valves while achieving the superior material benefits of ductile iron.

Check Valves
Dual Disc
ASME 150, 300, 600, 900
Carbon and Stainless Steel

MODELS:
CV 41 - DI Wafer Class 150 Ductile Iron Sizes 2" - 24"
CV 41A - DI Wafer Class 150 Ductile Iron Sizes 2" - 24"
CV 42 - CS/SS Wafer Class 150 Carbon or Stainles,s Sizes 2" - 24"
CV 44 - CS/SS Wafer Class 300 Carbon or Stainless, Sizes 2" - 24"
CV 46 - CC/SS Wafer Class 600 Carbon or Stainless, Sizes 2" - 24"
CV 47 - CC/SS Wafer Class 900 Carbon or Stainless, Sizes 2" - 24"

SIZE RANGE: 2" - 24"
Larger Sizes Available

Wafer CV, Lug Type

Titan Wafer Style Lug Type Model CV 42L-CS Carbon Steel

Minimal Head Loss
Contour of body provides a short and straight flow path that generates very little turbulence. Additionally, the spring-loaded discs are designed with very low cracking pressure which reduces the amount of energy required to open the valve.

Check Valve Wafer Type
Lug Style
ASME Class 150
Carbon and Stainless Steel

MODELS:
CV 42L - CS/SS Lug Class 150 Carbon or Stainless, Sizes 2" - 24"

SIZE RANGE: 2" - 24"
Lug Styles are Blind Tapped as Standard
2" - 5" Have Retainer-Ring Design.
6" - 24" Use Retainer-Cap Design.

Fugitive Emission Design
The retainer-less body design eliminates potential leak paths to the environment so there are no body emissions.

Single Disc Check Valves

Check Valve Single Disc
Threaded & Socket Weld

Titan Single Disc Threaded & Socket Weld Check Valve

Single Disc SS Check Valve

Check Valve, Stainless Steel, ASME Class 300, Threaded, Socket Weld

MODELS:
CV 88T - SS
Stainless Steel - Threaded
Sizes 1/2" - 3"
CV 88S - SS
Stainless Steel Socket Weld
Sizes 1/2" - 3"

Size Range: 1/2" - 3"

Simple Design
The all stainless-steel body coupled with a simplified design (only three parts) helps to eliminate possible failure points. The need for O-rings or gasket seals is not needed.

Swing Check Valve
Short Wafer Type

Titan Swing Check Single Disc Short Pattern

Single Disc Short Pattern Design

MODELS:
CV 12-CS
Body: Carbon Steel
Seat/Seal: Buna-N
Short Wafer Class 150 Carbon Steel Sizes 2" - 24"
CV 12-SS
Body: Stainless Steel
Seat/Seal: PTFE
Short Wafer Class 150 Stainless Steel Sizes 2" - 24"

Size Range: 2" - 24"

Robust Design
This is a self-acting, non-return, single plate, wafer type swing check valve which provides high quality and reliability within a simplified construction.

Check Valve Single Disc
Swing Type Wafer

Titan Wafer Check Valve Single Disc Carbon Steel

Single Disc Swing Check Valve

Check Valve, Single Disc Swing Type Wafer Type

MODELS:
CV 31-DI
Body: Ductile Iron Seat: Buna-N
Disc: Stainless Steel
ASME Class 150 Sizes 2" - 12"
CV 32-CS/SS
Body: Carbon Steel - Seat: Viton
Body: Stainless Steel - Seat: PTFE
Disc: Stainless Steel
ASME Class 150 Sizes 2" - 12"
CV 34-CS/SS
Body: Carbon Steel - Seat: Viton Body: Body: Stainless Steel - Seat: PTFE
Disc: Stainless Steel
ASME Class 300 Sizes 2" - 12"

Size Range: 2" - 12"
(14" - 24" Available)

 

Full Body Single Disc
Swing Check

Swing Check w/ Weight & Lever

Full Body Check Valve with Weight & Lever Model CV31WF-CI

Model CV31WF-CI

Proven Design
The full body swing check is one of the most well-known types of check valves. It is ideal for preventing flow reversal which aids in protecting compressors, pumps, and downstream tanks and vessels.

Full Body Swing Check
Valve - Flanged Ends

Single Disc
ASME 125
Cast Iron Body

MODEL:
CV 31WF-CI
Body: Cast Iron
Body Seat: Bronze
Disc: Cast Iron
Disc Seat: Buna-N
Weight & Lever : Cast Iron

SIZE RANGE: 2" - 12"

Full Body Swing Check

Titan Full Body Check Valve Model CV31F-CI

Model CV31F-CI

Proven Design
The full body swing check is ideal for preventing flow reversal which aids in protecting compressors, pumps, and downstream tanks and vessels. The Titan CV31F can also be used to isolate high pressure systems from low pressure systems and to prevent contamination between systems.

Full Body Swing Check
Valve - Flanged Ends

Single Disc
ASME 125
Cast Iron Body

MODEL:
CV 31F-CI
Body: Cast Iron
Body Seat: Bronze
Disc: Cast Iron
Disc Seat: Buna-N

SIZE RANGE: 2" - 12"

Copyright © 2022 Lone Star Supply Co. • Site Map

P.O. Box 8508, Bacliff, TX 77518
2815 Avenue J, San Leon, TX 77539 - (281) 339-5800